CCNA 2 labskill chapter 4

Lab 4.1.5 Subnetting a Network

Objective

·         Create an IP addressing plan for a small network.

Background / Preparation

In this activity, you will play the role of an onsite installation and support technician from an ISP.  A customer has called the ISP complaining of e-mail problems and occasional poor Internet performance. On an earlier site visit, the technician had created diagram of the customer’s existing network shown here.

The ISP is preparing a design for a network upgrade. The interim topology diagram for the proposed network is shown below.

The ISP is preparing a design for a network upgrade. The interim topology diagram for the proposed network is shown below.

Step 1: Analyze the network

a.       Referring to the Rough Design Notes, determine the minimum number of hosts that a subnet needs to support the new network design.

1)    The largest subnet must be able to support 30 hosts.

2)     To support that many hosts, the number of host bits required is 2 hosts

b.       What is the minimum number of subnets required for the new network design? 2

c.        Can this network be subnetted according to the requirements? bisa

For example: If four subnets are required and the largest subnet has to support 128 hosts, this is a problem, because a subnet in a class C network that has been partitioned four ways can support only 62 hosts.

d.       Fill in the blanks to summarize the subnetting requirements of this new network design:

This network requires 2 subnets, each supporting 29 hosts. Therefore, 255.255.255.0/27 host ID bits are reserved for the subnet ID. With those values, this network supports 4 subnets, each subnet having 30 hosts.

Step 2: Calculate the custom subnet mask

Now that the number of subnet ID bits is known, the subnet mask can be calculated. A class C network has a default subnet mask of 24 bits, or 255.255.255.0. What will the custom subnet mask be?

The custom subnet mask for this network will be 255.255.255.224or /27

Step 3: Specify the host IP addresses

Now that the subnet mask is identified, the network addressing scheme can be created. The addressing scheme includes the subnet number, the subnet broadcast address, and the range of IP addresses assignable to hosts.

a.       Complete the table showing all the possible subnets for the 192.168.1.0 network.

subnet	Subnet Address	Host IP Address Range	Broadcast Address
4	255.255.255.224	30 hosts	192.168.1.0
4	255.255.255.224	30 hosts	192.168.1.30
4	255.255.255.224	30 hosts	192.168.1.90
4	255.255.255.224	30 hosts	192.168.1.120
4	255.255.255.224	30 hosts	192.168.1.150
4	255.255.255.224	30 hosts	192.168.1.180
4	255.255.255.224	30 hosts	192.168.1.210
4	255.255.255.224	30 hosts	192.168.1.240
4	255.255.255.224	30 hosts	192.168.1.270

b.       for it to be completed. Hosts will be assigned IP addresses as follows: (fill in the table below )

Device	Interface	IP Address	Connect to	IP Address

Step 4: Consider other subnetting options

What if there were more than 30 hosts that needed to be supported on either the wired or wireless portion of the network. You could borrow fewer bits, which would create fewer subnets, but each one would support a greater number of hosts per subnet.

a.     How many bits would be borrowed to create four subnets? 2 buah bit

b.     How many bits would be left for hosts on each subnet? 5 bit

c.     What is the maximum number of hosts each subnet could support? 30 host- 2=28            

d.     What would the subnet mask be in dotted decimal and slash number (/#) format?             255.255.255.224or /27

e.    If you start with the same 192.168.1.0 network as before and subnet it into four subnets, what would the subnet numbers be?               

Step 5: Reflection

a.       Does subnetting help reduce the problem of IP address depletion? Explain your answer.

ya, sangat membantu mengurangi masalah depletions pada IP address, karena bisa membedakan network identifier dengan host identifier.

b.       The Rough Design Notes diagram noted that the wireless subnet would have up to 30 PCs connecting. In pairs or in small groups, discuss whether or not that creates a situation in which IP addresses might get wasted. Does it matter, and why or why not?

sia sia karena proses subnetting yang menghasilkan beberapa subjaringan dengan jumlah host yang sama telah dilakukan, maka aka nada kemungkinan di dalam segmen –segmen jaringan tersebut memiliki alamat – alamat yang tidak digunakan.

c.        There are alternate methods of subnetting using CIDR and VLSM. Would VLSM be a worthwhile option for subnetting this network? Discuss in small groups.

vlsm bisa menjadi solusi karena teknik subnetting dengan VLSM dapat dilakukan secara rekrusif : network identifier yang sebelumnya telah disubnetkan, di subnetkan kembali . maka dengan kata lain pengambilan kembali sisa dari bit- bit host.

CCNA Labskill chapter 3

Lab 3

Step 1: Identify the RAM in a computer

·      With Windows XP, there are two ways to view control panels: Classic View and Category View. The options available depend on which one of these two views you are using. If you see the Switch to Category View option on the left, you are currently in the classic view mode. If Switch to Classic View is displayed, you are currently in Category View mode. For this step, you want to use Classic View mode.

·      From the Start menu, select Control Panel. In the Control Panel, choose System to open the System Properties dialog box. Alternatively, you can get this information by clicking theStart button and right clicking the My Computer icon. Next, choose Properties from the drop-down menu. The computer operating system and service pack information are listed in the upper part of the dialog box. The computer processor type, speed, and memory are listed in the lower portion.

·      In this example, the computer processor is a Pentium 4 processor with a clock speed of 3.20 gigahertz (GHz). Clock speed is a measurement of the number of cycles per second that a processor is capable of doing. The number of cycles impacts the number of instructions per second that the CPU can process. A higher clock speed generally means that a processor is capable of executing more instructions per second. The computer has 448 MB of RAM available for the CPU.

·      Check your computer and determine the amount of RAM available to the CPU. How much RAM is inyour computer?

è   1,99 GB of RAM

Step 2: Determine the size of the hard disk drive

1.      Determine the size of the hard drive on your computer. What is the total size of the hard drive in GB?

·                19,5 GB

2.      What is the used space of your hard drive in GB?

·                8,06 GB

3.      What is the free space of your hard drive in GB?

·                11,4 GB

Step 4: Check for other storage devices

4.      How many drive letters are shown in the window that appears?

·           Five drive

Step 5: Reflection

·           Why is it important to know the amount of RAM in your computer?

è  RAM is the actual workarea. All the calculation are the calculation are done in CPU and result and data is stored first on RAM and yhen transferred to harddisk. So it is the most important one.

·           Why is the size of a hard drive as well as the space being used important?

è  The size of hard disk and the space used is important only for those who were running out hard disk space and not or those who don’t have enough data to upload on their hard disk so the size of the hard disk and space used is important depending upon how an individual use the hardisk space